Terrace cover configurator
Build your cover to size. The drawing follows what you enter, and the price updates item by item.
- 1Terrace and sizes
- 2Covers, windows and doors
- 3Finish
- 4Check and basket
Drag to turn. Click a bay — it becomes a cover. Posts can be dragged at the blue dot.
Walls
Left side — 300 cm, 1 bay
Front wall — 400 cm, 1 bay
Right side — 300 cm, 1 bay
Summary
Bottom edge
Applies to the whole terrace.
Click an opening to edit it. The drawing is to scale; dashed lines mark the welds where 250 cm panels join.
Sides of the terrace
A terrace usually needs several covers — each side is its own panel. Add as many as you need and set them up one by one.
How it is fixed
Basic shape
Dimensions — Finished cover size
Detailed measuring rules
Width: from the outer face at a corner post; at an intermediate post (8 cm or wider) to its centre, narrower to its far face. Height: on the front (eave) side, floor to the underside of the rafters, where they sit into the beam; the cover's top edge is screwed there. On a sloped side the cover is fixed to the rafter's face and reaches its top, so measure to the rafter's top there. What you type is the finished size: nothing is added, and any size can be overwritten if the cover is to start lower. On a sloped side made in two pieces, both pieces are measured to the middle of the horizontal beam; under 8 cm they overlap.
How we measure: from the outer face of a corner post. At an intermediate post of 8 cm or more, to its centre — the two covers meet there; narrower, to its far face, because the covers overlap across it. Height: floor to the underside of the rafters, where they sit into the beam; the cover's head is screwed there, straight. The 3D works this out; a size you type is the finished size and is not touched.
Not sure where to measure from? The 1-minute video shows you; the detailed rules open below.
Post width
A 10 cm post takes both welded edges side by side, so the covers do not overlap. Each unit gets its own turn-button strap and tab along its edge and fixes separately.
Beam below the rafters
What is this?
The strip from the rafters' underside to the beam's underside — the cover's top edge is screwed there. Also editable in the 3D step under "For fixing", with the corner post size.
The horizontal beam at the eave that the cover screws to. Those 16 cm are always covered by fabric, so a glazed triangle can only start above it.
Windows and doors
Details — roll, welds, panes
Every window shares one height and sill — windows are never made at mixed levels on one panel. Clear film comes on a 220 cm roll, so a window is at most 220 cm tall. Width is not limited: anything wider than 580 cm is divided into equal panes with a 14 cm band of fabric between them, because film cannot be seamed — that is how it is made.
Cover colour
Applies to the whole terrace.
Bottom edge
Applies to the whole terrace.
Front side — price
The cover's price includes the fittings (hems, turn buttons, straps, the screwed head, screws). The cloth is charged on the whole panel (window areas included); charged on top: the clear film, zipped doors and the bottom edge finish (eyelets, drip edge). No VAT is added.
Summary — Front side
The cover is made to the sizes you approve here.
The whole terrace
The business is VAT-exempt: prices carry no VAT and none appears on the invoice. The price shown is the price payable.
Orders through this shop can only be accepted from private individuals, not from businesses.
A feltüntetett ár a ponyvák gyártási díja, minden szerelékkel. Futárral küldjük — a szállítás díját a visszaigazoláskor, a csomag mérete alapján adjuk meg. A felszerelés egyszerű, videós útmutatónk végigvezeti rajta.
Nothing is charged when you send the order — we check that every detail and size is there and issue a payment request. The sizes are the customer's responsibility.
Not sure about the measurements? Upload photos of your terrace structure with the order, and call us any time: 06 30 356 3239. We will help you measure so that what arrives is exactly what you need.